Ability to specify a Subnet (or subnets) in IP Address Filters

Post here your suggestions for new possible features in SmartFoxServer 2X.

Moderators: Lapo, Bax

tewner
Posts: 7
Joined: 06 Jan 2013, 12:06

Ability to specify a Subnet (or subnets) in IP Address Filters

Postby tewner » 04 Jul 2016, 08:16

We would like to enable access from our office network to the Remote Admin tool (configured in "allowedRemoteAddresses"). We would like to be able to configure something like:
192.168.1.0/24
192.168.4.0/24
User avatar
Lapo
Site Admin
Posts: 20214
Joined: 21 Mar 2005, 09:50
Location: Italy

Re: Ability to specify a Subnet (or subnets) in IP Address Filters

Postby Lapo » 04 Jul 2016, 10:06

Hi,
at the moment you can only specify single IP addresses. Maybe you could use a white list instead, if it's easier to specify which addresses are allowed?

Alternatively you could set up a firewall to block all those subnets.

Thanks
Lapo
--
gotoAndPlay()
...addicted to flash games
tewner
Posts: 7
Joined: 06 Jan 2013, 12:06

Re: Ability to specify a Subnet (or subnets) in IP Address Filters

Postby tewner » 04 Jul 2016, 13:34

Sure, we'll use a firewall in this case. Perhaps, though, being able to specify a subnet could be added in a future release?

-Mike
User avatar
Lapo
Site Admin
Posts: 20214
Joined: 21 Mar 2005, 09:50
Location: Italy

Re: Ability to specify a Subnet (or subnets) in IP Address Filters

Postby Lapo » 04 Jul 2016, 14:25

Yes, I have added a note in our feature todo-list.

Thanks
Lapo

--

gotoAndPlay()

...addicted to flash games

Return to “2X Features Wish List”

Who is online

Users browsing this forum: No registered users and 1 guest