Hi,
I want with SmartFoxServer 2X AdminTool to my server.
I have set the Remote Admin port, disabled the firewall in the server and also in the machine from which I want to access.
In my router I have opened the Remote Admin access port, but I cannot access.
Below I will put some pictures. What am I doing wrong?
Greetings
Set up Remote Admin
Re: Set up Remote Admin
Hi,
in your config, under Server Settings you have way too addresses added to the "Socket Addresses" section.
Remove all the "127.0.0.1" from that box and restart the server. Since you are using "0.0.0.0" this already covers all bindable addresses, localhost included.
Once this is done you can check from the other computer that wants to connect if you can reach the server by running a telnet test.
either via Windows command prompt or MacOS/Linux terminal.
Finally are you trying to connect from within the local network or from outside?
If it's the latter then you also need to configure the NAT in your router so that port 9944 is mapped to the private address of the machine running SmartFoxServer
For more details on this check the docs here:
http://docs2x.smartfoxserver.com/Gettin ... stallation
Under the "Exposing the server to the outside world" section
Hope it helps
in your config, under Server Settings you have way too addresses added to the "Socket Addresses" section.
Remove all the "127.0.0.1" from that box and restart the server. Since you are using "0.0.0.0" this already covers all bindable addresses, localhost included.
Once this is done you can check from the other computer that wants to connect if you can reach the server by running a telnet test.
Code: Select all
telnet <server-address> 9944
either via Windows command prompt or MacOS/Linux terminal.
Finally are you trying to connect from within the local network or from outside?
If it's the latter then you also need to configure the NAT in your router so that port 9944 is mapped to the private address of the machine running SmartFoxServer
For more details on this check the docs here:
http://docs2x.smartfoxserver.com/Gettin ... stallation
Under the "Exposing the server to the outside world" section
Hope it helps
Re: Set up Remote Admin
Deleting 127.0.0.1 worked !!
Thank you!!
But can't I specify a static IP?
Thank you!!
But can't I specify a static IP?
Re: Set up Remote Admin
I have set the ip on Remote Admin
Cheers
Cheers
Who is online
Users browsing this forum: No registered users and 132 guests