We would like to enable access from our office network to the Remote Admin tool (configured in "allowedRemoteAddresses"). We would like to be able to configure something like:
192.168.1.0/24
192.168.4.0/24
Ability to specify a Subnet (or subnets) in IP Address Filters
Re: Ability to specify a Subnet (or subnets) in IP Address Filters
Hi,
at the moment you can only specify single IP addresses. Maybe you could use a white list instead, if it's easier to specify which addresses are allowed?
Alternatively you could set up a firewall to block all those subnets.
Thanks
at the moment you can only specify single IP addresses. Maybe you could use a white list instead, if it's easier to specify which addresses are allowed?
Alternatively you could set up a firewall to block all those subnets.
Thanks
Re: Ability to specify a Subnet (or subnets) in IP Address Filters
Sure, we'll use a firewall in this case. Perhaps, though, being able to specify a subnet could be added in a future release?
-Mike
-Mike
Re: Ability to specify a Subnet (or subnets) in IP Address Filters
Yes, I have added a note in our feature todo-list.
Thanks
Thanks
Return to “2X Features Wish List”
Who is online
Users browsing this forum: No registered users and 36 guests